Adaptive software: MetalCut
Technical parameters:
- Digital laser control signals, differential output, TTL level, up to 20mA driving capability
- PWM frequency can be adjusted from 2.5KHz to 100KHz. PWM duty ratio is 1%~99%
- Laser power control: analog voltage, 0~5V adjustable according to the motor control signal differential output, TTL level, 20mA driving capability, the max. motor control pulse frequency is 500KHZ.
- The USB max. transmission speed is 12 Mbps, the longest distance is 5 meter.
- 4-way generalphotoelectric isolation OC gate output, the max.drive capability is 600mA.
- Linear/ circular/B Spline interpolation precision: +/-0.5pulse
- 4-way generalphotoelectric isolation, TTL level
Application Area:Metal and non-metal laser cutting
Product Introduction:
Metal and non-metal laser cutting system is based on the RDC6332Mmotion controller.Employed with thin metal plate and non-metal laser cutting techniques, this control system is suitable for non-metal laser cutting and metal laser cutting.
Functions:
- System encryption and parameters storage on board, file storage capacity is up to 256M.
- Customized boot screen, controller kernel program upgrade remotely
- 2-way digital/analog laser control interface
- Dedicated RF laser control interface
- At most 4-axis stepper/servo motor open/closed loop control
- Soft/ hard limit coordinates protection for optional
- Linear, circular arc and B Spline interpolation
- Flexible dedicated LFS interface, supporting many manufactory’s LFS system
- Support various metal cutting technology control
Product Accessories:
controller, display panel, shielded Ethernet cable, shielded USB cable, 3.81mm terminal
Mainboard Size:220mm * 134mm
Extension interfaceboard size:170mm*120mm
Power Source:24V/3A